Turbo pattern copper transitional polishing pad

• Diameter of the pad is 3″(80mm）.
• The thickness of the working surface is 6mm.
• Available grits 30# 50# 100# 200# 400#.
• Turbo pattern allows for better tooling pressure while still allowing slurry and debris to move away from the active work area.
• Unlike traditional resin pads, the copper transitional polishing pad is made from a copper bond formulation that will last longer than any resin pad. Copper bond also has a significant advantage over resins in cutting ability.
• Designed to ease the transition between the metal grinding stage and the resin honing and polishing stage.
• Velcro back works universally with most of the floor grinders. Velcro color light blue for 30#, dark blue for 50#, yellow for 100#, orange for 200#, red for 400#.
• Works efficiently under large grinders and small grinders.
• Works well on hard, medium, and soft concrete.
Recommended use wet.

Z-LION 16KH copper transitional polishing pads are designed with a unique copper bond matrix for aggressive cutting and long-lasting. The special features of this copper polishing pad are as follows:
• Work efficiently. When doing concrete polishing, it is common to drop back to 50-grit resin after 100-grit metal due to the deep scratch pattern created by metal tools. This is not necessary with the copper transitional pad as a 100-grit transitional pad will cut like 50-grit resin but with a scratch pattern of 100-grit. So when goes to the polishing process you can skip the 50 grit and start on 100 grit, reducing time spent on a project without compromising quality.
• Work aggressively. This copper transitional polishing pad will remove scratches from metal bond tools efficiently and can also be used as an economical alternative to finer metal bond tools in some cases.
• Last longer. This copper transitional polishing pad promotes a longer run life than any resin polishing pad.
• Quality consistent. Strict manufacturing process and quality control ensures quality consistency.