Trapezoid PCD Disc for Coating Removal

Z-LION PCD-01 trapezoid PCD diamond disc works excellently on removing all kinds of coatings on concrete surfaces and getting the floor prepared for grinding.

Description:

• Typical trapezoid shape matches with most floor grinders. 3-M6 threaded holes, 3-D9mm through holes, and Diamatic/Blastrac 6 holes are all available.
• Two of 1/4 quarter round PCDs and a wear bar which is usually in 30grit.
• PCD can be 1/2 round as well and the worn segment can be in the shape of a rectangle, round, arrow, etc.
• Mainly used for removing floor coatings like paint, glue, resin, epoxy, etc. Especially good for removing thick/heavy epoxy coatings.
• Clockwise and counterclockwise rotational directions are interchangeable and fit all the major planetary floor grinders.
• Besides typical Trapezoid, HTC, Husqvarna, Lavina, Terrco, Werkmaster, Scanmaskin, and Contec connections are all available.

Features:

• High-quality diamond is used in the matrix of the wear bar and high-quality PCDs make the tool with good grinding capacity.
• PCDs and wear bars are professionally welded onto the trapezoid metal base, extending the lifetime of the tool.
• PCDs are slightly higher than the wear bar which acts as a stabilizer and depth guide to ensure the PCD removes coatings effectively and efficiently without damaging the concrete.
• PCDs are direction-specific, operator needs to check the direction of rotation of the grinder heads and mount left or right-hand PCDs to match. We mark the left or right-hand direction on the tool or paint different colors for the left and right hand for the operator to pick the correct tool quickly.