Trapezoid PCD coating removal tool for scraping coatings on concrete floors

• Typical trapezoid shape matches with most floor grinders. 3-M6 threaded holes, 3-D9mm through holes, and Diamatic/Blastrac 6 holes are all available.
• Two of 1/4 quarter round PCDs and a wear bar which is usually in 30grit.
• PCD can be 1/2 round as well and the worn segment can be in the shape of a rectangle, round, arrow, etc.
• Mainly used for removing floor coatings like paint, glue, resin, epoxy, etc. Especially good for removing thick/heavy epoxy coatings.
• Clockwise and counterclockwise rotational directions are interchangeable and fit all the major planetary floor grinders.
• Besides typical Trapezoid, HTC, Husqvarna, Lavina, Terrco, Werkmaster, Scanmaskin, and Contec connections are all available.

Z-LION Trapezoid PCD coating removal tool works excellently on removing all kinds of coatings on concrete surfaces and getting the floor prepared for grinding. The special features of the tool are as follows:
• High-quality diamond is used in the matrix of the wear bar and high-quality PCDs make the tool with good grinding capacity.
• PCDs and wear bars are professionally welded onto the trapezoid metal base, extending the lifetime of the tool.
• PCDs are slightly higher than the wear bar which acts as a stabilizer and depth guide to ensure the PCD removes coatings effectively and efficiently without damaging the concrete.
• PCDs are direction-specific, operator needs to check the direction of rotation of the grinder heads and mount left or right-hand PCDs to match. We mark the left or right-hand direction on the tool or paint different colors for the left and right hand for the operator to pick the correct tool quickly.