Floor grinder: Why does it become rougher the more you grind?

Principles of grinding floors with a grinder

Grinding floors with a grinder is an essential process for floor maintenance and restoration and is designed to remove surface imperfections and stains while achieving a flat, smooth surface.

• Grinding process: The grinder is equipped with grinding discs for deep grinding of floors, effectively removing surface blemishes, stains, and blemishes.  This process is essential to restore the appearance of your floor and achieve an even, smooth surface.  The degree of polishing is determined according to the condition of the floor, and the depth is generally 0.5 to 1mm.  This depth removes surface stains, minor scuffs, and polish marks, effectively rejuvenating the floor to look new again.
• Techniques and Notes: When grinding floors with a grinder, it is important to consider the type of flooring material, surface condition, and desired results.  Choosing the right grinding disc and controlling grinding depth is critical to achieving the desired results while maintaining the integrity of the floor.  Additionally, the speed and movement of the grinder must be carefully managed to ensure even grinding and a consistent finish across the entire floor surface.
• Benefits of grinding: Using a grinder to grind your floors has many benefits, including removing surface blemishes, stains, and scuffs, leaving your floors looking new and beautiful.  By effectively addressing surface imperfections and blemishes, the grinding process helps restore and enhance the appearance of your floors, leaving them looking fresh, clean, and revitalized.

Why does the floor become rougher when the grinder is used?

Grinding floors with a grinder is a delicate technical process that requires careful consideration of various factors to achieve the desired smooth and uniform surface.  However, if the floor becomes rougher during the grinding process, there may be several factors at play.  

• Improper operation: One of the main reasons why your floor becomes rough during the sanding process is due to improper workmanship.  Sanding floor is a technical job that, if performed incorrectly, can result in uneven or excessive wear.  For example, if the grinder is left in one place for a long time during operation, it may cause excessive wear on the floor surface, resulting in rough grinding marks.  Improper control of the grinder’s movement and pressure can also result in uneven and rough surfaces.
• Improper selection of grinding discs: Choosing inappropriate floor grinding discs can significantly affect the results of the grinding process. Using a floor grinding disc that is too hard may cause excessive wear on the floor surface, resulting in deeper wear marks and a rough surface. On the contrary, if the abrasive disc is too soft, it may not be able to effectively treat the pits and depressions on the floor surface, resulting in less-than-ideal results.  Grinding disc selection is critical to achieving the desired level of wear and smoothness.

How do you prevent the floor from becoming rougher after grinding?

• Fully prepared: Before beginning the floor grinding process, adequate preparation is crucial to ensuring a successful outcome.  It is crucial to clear the floor of any debris and obstructions to create a smooth and obstruction-free surface for sanding work.  Additionally, selecting the right grinding disc is critical to ensuring that the hardness and grit of the grinding disc are suitable for the specific conditions and required level of wear.  Proper preparation sets the stage for a successful and effective floor sanding process.
• Correct operation: During the floor sanding process, correct operation is crucial to avoid the floor becoming even rougher.  Operators must pay close attention to the contact between the grinding disc and the ground to ensure that the grinder does not stay in the same place for a long time, causing excessive wear and forming rough grinding marks.  Maintaining consistent motion and avoiding staying in one area for too long is crucial to achieving a smooth, even finish.  Additionally, controlling intensity and speed during operation is critical to preventing uneven and excessive wear, ultimately helping to achieve more consistent and desirable results.

In short, the process of grinding floors with a grinder requires a careful and meticulous approach to achieve the desired results.  By mastering the art of floor grinding through careful manipulation and selection of the appropriate grinding disc, an individual can effectively restore and enhance the appearance of the floor, ultimately contributing to the overall quality and effectiveness of the floor grinding process.